KEBIDU 433MHz Auto Copy Remote Control - 4 Channel Garage Door Control Duplicator - Gate Remote Control - Garage Door Remote Control Key

Brand : Kemei

• Origin : Mainland China
• Certification : CE
• Model Number : Copy Remote Control
• Working environment : -15℃ to +75℃
• Operating current : 14mA
• Operation method : Copy type
• Remote control distance : 100m (in open environment)
• Operating frequency : 433MHz
• Product size : 55 30 15mm/2.17 1.18 0.59"
• Choice : Yes
• Semi-choice : Yes

Chipset Compatibility:

• All fixed codes and learning codes including 2260, 2262, PT2264, 5326, SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 Series, 527, 1527, 2240.

Notes: For fixed code and learning code remote controls, the duplicator will work after duplicating. For rolling code brands listed above, please follow the original manual to program the duplicator to the receiver after duplicating.

Copy mode:

• Clearing memory:

  1. Press buttons 1 and 2 simultaneously until the LED flashes 3 times.
  2. Release button 2 (while still holding button 1) and slowly press button 2 three times, the LED will flash quickly.
  3. Release both buttons, the duplicator is ready to copy.

• Copy: Place the duplicator next to the original remote control, as close as possible.

  Fixed code remote control: Press and hold button 1 on the original remote control, then press and hold button 1 on the duplicator until the LED on the duplicator flashes, which means the duplication is successful. Repeat the above steps for other buttons. The duplicator will work after duplication.

  Rolling Code Remote Control: Press and hold button 1 on the original remote control, then press and hold button 1 on the duplicator until the duplicator LED flashes, which means the duplication is successful. Once one button is duplicated, the other buttons will be generated automatically. Please follow the original receiver's manual to insert the new duplicator to the receiver.

  If the code is accidentally erased, you can resume it by holding down the ''3'' and ''4'' buttons on the remote controls simultaneously. After 10 seconds, the LED will flash 2 times and turn off, indicating that the code of the copied remote control is resumed.